Fast face-frame assembly is great. Fast and accurate assembly that virtually eliminates sanding is even better.
The Face-Framing Table has four clamping cylinders that can be precisely adjusted, applying great pressure to the joint line on almost any size of frame. The table itself stands at a 30-degree angle, so it uses less floor space than a flat table. It also prevents back pain by allowing you to stand upright, rather than hunched over.
The all new LAB 300 Plus combination machining center, offers professional features for semi-professional shops at an affordable price point.
New features include a larger blade group (12″ blade capacity), larger working thickness on the planer, a wider slider, and three shaper speeds. Also the jointer table on the LAB 300 jointer opens toward the machine, and away from the operator which dramatically increases the ease of use.
Machines for Clamping Dovetail & Doweled Drawer Boxes.
Pneumatic Drawer Clamp designed for Dovetail & Doweled Drawers
Successfully Clamp & Square both Dovetail & Doweled Drawer Boxes!!
If you’re looking for the ultimate machine to build face-fames, this is it. The DK3100 contains three spindles that allow you to drill two pocket holes across rails of varying widths in just one machine cycle. Best of all, the DK3100 can also be quickly changed to drill a single pocket hole, like our DK1100 series, by simply removing a drill bit. If you’re serious about face-frame production, the DK3100 is the machine that will deliver real performance to your shop and profits to your bottom line.
The DK3100 not only drills two pocket holes in one cycle, it also gives you options for spacing the holes. You can set the drill spindles at 3/4“, 1″, and 13/4” on center, perfect for today’s most common rail widths.
Cantex Ergo is a power tool for high-precision planning of solid wood edges. The unique cutting geometry produces a shearing cut, which ensures clean results without tearing. The shearing cut is essential when the fibre orientation of the glue edges runs against the cutting direction.
The cutting height of the Cantex Ergo can be precisely adjusted in increments of 0.035 mm. With the parallel guide in the accessories range, the Cantex can be precisely adjusted to the exact edge width, thus allowing flush-milling of finished panels without damage to the coating.