       |
 |
| 1) CTD/Tigerstop Cut-Off Station |
| CTD/ TigerStop Cut-Off Station |
|
1- Model # TS10 Tiger Stop |
|
2- TABNR 10/ Tables no Rollers |
|
2- SAP (Saw Attachment Plate) |
| 1- PF (Pusher Foot) |
|
1- BF (Back Fence) |
| Line Filter Surge Protector-------------------------------- N/C |
| CS Control Stand--------------------------------------------- N/C |
|
CTD Straight Cut-Off Saw |
| 1- Model # F255 R |
|
1- FSD (Floor Stand Dust & Drip Pan) |
|
1- Magnetic Starter |
| 3- MT 1280D Carbide Saw Blades |
| 2) Ritter Boring Machine |
|
** Specifications ** |
| 1” spindle centers |
| 3.4 HP spindle drive motor, TEFC |
| Manual controls, 1 ph 110v, 60 hz |
| Foot actuated boring cycle |
| 8”x 20” work table area |
| 4 material positioning stops |
|
3” boring head stroke |
| Single holddown cylinder |
| 3) Tilt Rod Stapler |
|
Tilt Rod Stapler – Semi-automatic |
|
INCLUDES : Staple Gun |
|
Tilt-rod material is clamped to Gage Bar and |
| advanced manually through the TRS-1. The |
| gage bar automatically triggers the firing of |
| staples at designated centers. |
Tilt
| 4) Louver Stapler |
| Louver Stapler Model LS-3 |
| INCLUDES: Staple Gun |
|
For louvers/ tilt rod – 1 7/8”, 2 ½”, 3 ½” and 4 ½” |
|
Automatically staples and advances pre-stapled |
| Tilt rod to louvers |
| 5) J & P Double End Louver Drill |
| * J & P Louver Drill * |
| MODEL#: LD—123 |
|
110 volt, Single Phase |
|
2 Motors, 1/3 HP each |
|
90 lbs air required |
|
Linear bearing in boring heads |
|
Minimum opening 8”, maximum 36” |
|
PLC controls |
|
Size of machine: 48” W, 72” L, 50” H |
|
Color: white |
|
Weight: approximately 350 lbs |
| 6) Router Table |
|
For routing Tilt Rod Relief in Rail. |
| Hand wheels adjust in or out to accommodate rail |
| length from 1" to 40" while maintaining center at all |
| times. Backstop is adjustable for length of cut. |
| RT-1 should be mounted on customer furnished |
| bench or framework along with customer furnished |
| router. |
| 7) Shutter Boring Machine |
| *Detel HM 37 Shutter* |
|
3 pneumatic clamping cylinders |
|
Control panel w/ emergency stop |
|
Electrical 220 volt, 60 hz, 3 phase |
|
Working air pressure 90 psi |
|
Dual 2HP motors, 230v 3 Phase |
|
37 spindles on 1” centers (25.4mm) |
|
Stroke of 3.5”, Machine Wt. 760lbs |
|
4 repeat stops (1/4” dia.) |
|
Pneumatic stroke via foot pedal |
|
Work Table 47in. x 12 in. |
|
47” Back fence w/ 39” extension |
|
***TOOLING***
|
|
1) Detel Boring Machine/HM-37 |
|
24 – ¼” x 57 mm Carbide Boring Bits |
|
2) Ritter Boring Machine/R-131 |
|
2 – 3/8” x 41/2” Carbide Boring Bits |
|
3) Router Table |
| 1 – 5/8” Core Box Bit |
| ** Freight FOB per Destination ** |
| *To have a personalized quote to fit your need Please Call 239-947-0348; 866-842-9455; or email: kevin@reardonmachinery.com * |
| Reardon's Woodworking Machinery, INC. |
| 24577 Redfish Street |
| Bonita Springs, FL 34134 |
| Phone: 239-947-0348/ Fax: 239-498-1809/ Toll Free: 888-842-9455 |
| http://www.ReardonMachinery.com |
 |
